13.56 MHZ RFID USB RFID - NFC READER KEYBOARD EMUALTOR

• Card - Tag number is converted into a DS1990A format that is sent further via USB interface.
• Bicolour (green/red) LED integrated
• Compliant with ISO14443-A/NFC
• The built-in USB socket
• USB cable sold separately

The RFID reader CZ-1W-H0-KBRD reads identification data (UID) wireless of passive transponders (cards, tags, etc.) compatible with ISO/IEC14443-3-A (e.g. MIFARE cards).

The built-in two-colour LED and Buzzer.The device is connected by USB cable with USB B MINI male plug from the device side and USB A male plug from the PC side.

The appropriate cable is provided at the customer's request after determining his preferences.

The device emulates the keyboard by sending the card code to the PC class device once, each time the RFID card is put on the reader.

The RFID reader connected to a PC, will be recognized as a keyboard device and automatically configured and the red LED will light up.

In order to write down the code from the card, start any text document, e.g. notebook, Word, Excel, and then place the card on top of the RFID reader.
The card code will be written down as an ASCII string at the beginning of the text cursor.

The LED will turn from red to green and you will hear a short beep.

In order to read the same RFID tag once again or to obtain a code from another RFID tag, remove the current card from the reader field and apply the same or a new card again.

The readout blockade works only when the card is located permanently in the RFID reader field.